Shenzhen Fitconn technology co. Ltd
Create the health by heart!
Add to Cart
OLED Display Fingertip Pulse Oximeter , Blood Oxygen Saturation Pulse Oximeter Probe Monitor
Product Description
Model: FPX-037
Display Type: OLED display
- SP02 Measurement Range: 70%-100%
- Accuracy +/-2% on the stage of 70% - 99%
- Pulse Range Measurement Range: 25 – 250 BPM
- Accuracy +/-1BPM or +/-1% (larger)
Power Requirement: Two AAA 1.5V alkaline batteries
- Voltage range: 2.6 - 3.6V
Low Consumption: Less than 30mA
Measurement Accuracy: SpO2 Accuracy +/-2% on the stage of 70% - 99%
- No definition of less than 70%
- Pulse rate +/-1BPM or +/-1% (larger)
Measurement Performance in Low Perfusion Condition: The pulse wave is available without failure when the simulation pulse wave amplitude is at 6%
Anti-interference ability of ambient light: Natural light in indoor lighting and the existing oxygen measurements under dark conditions with the measured values compared to less than 1%.
The product will automatically be powered off when no signal is in the product for longer than 8 seconds.
Dimension Length: 58 mm, Width: 32mm
- Weight: 54g (including two AAA batteries)
Environment Requirements: Operation Temperature: 40° F - 104°F
Storage Temperature: 50° F - 104°F
The Oximeter is calibrated to display functional oxygen saturation. Principle of the Oximeter is as follows:
An experience formula of data process is established taking use of Lambert Beer Law according to
Spectrum Absorption Characteristics of Reductive hemoglobin(R Hb) and Oxyhemoglobin (O2 Hb) in glow
and near-infrared zones. Operation principle of the instrument is Photoelectric Oxyhemoglobin Inspection
Technology is adopted in accordance with Capacity Pulse Scanning and Recording Technology, so that
two beams of different wavelength of lights (660nm glow and 940nm near infrared light) can be focused
onto human nail tip through perspective clamp finger-type sensor. Then measured signal can be obtained
by a photosensitive element, information acquired through which will be shown on OLED display through
process in electronic circuits and microprocessor.
FAQ:
| Q1 | How fast can I get the quotation? |
| A | We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority. |
| Q2 | How can I get a sample to check your quality? |
| A | After price confirmation, you can require for samples to check our quality. |
| If you need the samples, we will charge for the sample cost. But the sample cost can be refundable after order confirmation when your quantity of the order is more about the MOQ. | |
| Q3 | What kind of logo files do you accept for printing? |
| A | PDF, Core Draw, Ai. |
| Q4 | Can you do the design for us? |
| A | Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your ideas and we will help to carry out your ideas into perfect products. It does not matter if you do not have someone to complete files. Send us high resolution images, your Logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation. |
| Q5 | What about the lead time for mass production? |
| A | Honestly, it depends on the order quantity and the season you place the order. The lead time is about 15-35 days. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country. |
| Q6 | What is your terms of delivery? |
| A | We accept EXW, FOB, etc. You can choose the one which is the most convenient or cost effective for you. |